Hello, Welcome to Shandong Xingtian Sunshine Intelligent Equipment Co., Ltd. Qilu Equity Stock Code: 100817  E-mail:jnxtsk@163.com English  | русский |  Elespañol     

Your present location:Home >> Products >> CNC Steels punching/Typing/Shearing production line >> HIGH SPEED CNC ANGLES STEEL PUNCHING, TYPING & SHEARING LINE
CONTACT US

China Jinan XingTian Sunshine CNC Machine Co.,Ltd.
 

Add:West of West Goods Station of Jinan City
E-mail:jnxtsk@163.com

Tel:(86)-0531-87581696
Fax:(86)-0531-87980587
 

MESSAGES
 
Content:
* Entered characters:0 Word
Less than or equal500Character
E-mail:
 
Example: example@mail.com
Verification:
   
  • Name: HIGH SPEED CNC ANGLES STEEL PUNCHING, TYPING & SHEARING LINE
  • MODEL: YJX-1612/2020
  • Views : 226

This production line is suitable for electric power, telecommunications, hardware, three-dimensional garage, elevator manufacture, air conditioning and other fields Angle profile of seal, hole, cut off the job, By changing the mold to form slotted hole, profiled hole at one-time.

1.Patented production:This machine is our patented production, it has a number of proprietary technologies, the patent numbers are respectively : ZL201220536172.7;ZL201220538193.2;ZL201230500115.9;ZL201320445846.7;ZL201320449391.6

2.Structure optimization:integrated design, hydraulic station is integrated with main engine, this design  reduce the area of machine and improve the utilization of plant.

3.Speed upgrade:on the basis of traditional machine,this machine reintegrate, speed up and upgrade, The speed of the car is up to 90 meters per minute, and the speed of the punching hole is up to 60 times/min, which greatly improves the working efficiency and provides a strong guarantee for users to create higher profits.

4.Operation of electric appliance: Electrical cabinet and operating cabinet are combined, so electrical wiring and the overall layout is more optimized, not only saves the floor space, but also reduces the failure rate of the electrical appliance, makes the electrical overhaul more convenient.

5.Servo car: equipped with Collision avoidance device, if it has slightly abnormal touch the Collision avoidance device will immediately alarm, thus the stability of the clamp part of the car is protected.

6.Feeding duct: is changed from the welding duct to the Rectangular duct. The car duct is changed from the rack rail to the double precision linear guide + precision rack, which not only improve the stability of the whole line but also improve the guide precision greatly.

7.Guide Device: the main feed port (the end of feeding duct) is equipped with pressing wheel guiding device, avoids the condition that angle steel cannot be sent normally due to bending deformation, make the products more perfect, the user does not need to worry about to crash injury accidents.

8.Mechanical measuring: this equipment has a special measuring device with special manipulator, which can measure the length of Angle steel more accurately.

9.Hydraulic pipe: the hydraulic pipe is connected by compression joint, which completely solves the leakage problem caused by the welding defect.

10.water-cooled plate: adopt the most advanced water-cooled plate instead of tube water cooling, increases the heat exchange area of the hydraulic oil, to avoid the equipment high oil temperature phenomena caused by long-time use, the user doesn't have to worry about the problem of oil temperature overheat.

 

MODEL

YJX-2020

YJX-1612

Angle steel size(mm)

L40×40×3—L200×200×20

L40×40×3—L160×160×12

Max.punchine(dia.×thi.)(mm)

Φ26×20(16mm,Q345)

Φ26×12(10mm,Q345)

Punching force(kN)

1000

600/1000

Typing force(kN)

700

700

Shearing force(kN)

1400

1500

Max.length of biank(m)

12

12

Max.length of finished(m)

10

12

Qty.of punch on each side

3

2/3

Qty. of typing group

4

Character size(mm)

14×10×19

CNC axis

3

Shearing mode

Double blade shearing

Single blade shearing

Feeding speed(m/min)

Max 90

Processing precision

Accordance with GB/T2694

Program function

Real time fault display

Programming mode

Input by keyboard & USB interface

 

XINGTIAN SUNSHINE

CNC STEELS PUNCHING / TYPING / SHEARING PRODUCTION LINE
CNC PLATE PUNCHING MACHINE
ANGLES STEEL TOWER PROCESSING AUXILIARY EQUIPMENT
STEEL PIPES TOWER PROCESSING EQUIPMENT
STEEL STRUCTURE PROCESSING EQUIPMENT
OTHER NON-STANDARD CNC EQUIPMENT

China Shandong XingTian Sunshine Intelligent Equipment Co.,Ltd.
 

Add:West of West Goods Station of Jinan City
E-mail:jnxtsk@163.com

Tel: +86-531-87581696
Fax: +86-531-87980587